LulzBot HS+ Tool Head | Hardened Steel | 1.2 mm
Suited for Advanced Users
Produce high-strength parts that retain their dimensional stability in harsh environments in a fraction of the time! The large 1.2 mm nozzle diameter and massive heater block with elongated melting zone is paired with the E3D Titan Extruder to enable extrusion rates of up to approximately 205 grams/hour.
Featuring a hardened steel nozzle and extruder hobb, this industrial 3D printer extruder head is capable of printing high-strength composite polymers on par with PEEK’s tensile strength (15,200 psi – ASTM638). These polymers are used in a wide range of high-demand applications, from structural components to the automotive industry.
Parts printed with these composites have higher impact resistance, resist deformation, while retaining strength in harsh and demanding environments. Industrial materials like PA-CF Low Warp combine strength and dimensional stability (less than 2% elongation at break – ASTM638) with the ability to perform in higher operating temperatures up to approximately 120° C (248° F).
Works with: LulzBot Mini 2
Layer Resolution: 0.6 mm – 1.0 mm (0.027 in – 0.039 in)
Nozzle Diameter: 1.2 mm
Nozzle Material: Hardened Steel
Extruder Hobb Material: Hardened Steel
Hot End Temperature Range: 120°C – 290°C (248°F – 554°F)
Extruder & Hot End: Genuine E3D Titan Aero
Maximum Extrusion Rate: Approximately 205 grams/hour | 45.69 mm³/s with PLA at 220°C (428°F)
Recommended filament diameter: 2.85 mm diameter (3 mm)
Supported Materials: Carbon-fiber filled Nylon, ABS, PETg, PLA, NinjaFlex TPU
Certified Open Source Hardware: US000148