LiteWorld Protective Enclosure For 3D Printers Still The Biggest and Best
August 21, 2019 | By Don Musilli | In LiteWorld Protective Enclosure
When the LiteWorld Protective Enclosure was introduced in early 2017, there was no other enclosure for 3D Printers that were capable of enclosing large format FFF 3D Printers that also had active filtration systems. Today, that is still the case. The LPE is one of the more expensive enclosures on the market but it is […]LiteWorld 3D Printer Enclosure Best In The Market
November 25, 2018 | By Don Musilli | In LiteWorld Protective Enclosure
In 2016 LiteWorld LLC introduced the LiteWorld Protective Enclosure that was designed specifically for the LulzBot TAZ 5 and 6 models as well as other large bed 3D Printers. The enclosure is made from 1/4″ plexiglass with aluminum support structures and two filters on the back of the housing. One filter is a carbon media […]3D Printer Enclosure For Better Printing and Clarity
August 21, 2017 | By Don Musilli | In LiteWorld Protective Enclosure
3D Printing has moved from the quasi-experimental tinker mode to full-fledged production mode in just 6 short years. Novices and tinkerers are now using 3D printers to make virtually anything they can design. We are calling it the 4th Industrial Revolution. If you are using a 3D Printer for the first time or you have […]
New 3D Printer Enclosure By LiteWorld
November 18, 2016 | By Don Musilli | In Blog, LiteWorld Protective Enclosure
The newly redesigned LiteWorld Protective Enclosure is now available through our website at: https://www.liteworldllc.com. The redesigned enclosure features an easy to assemble aluminum frame using a three-pronged knuckle joint that is simple attached using a threaded coupling. The new door hinge design is easy to set up and adjust and the size of the enclosure […]LiteWorld 3D Printer Enclosure New Design
October 9, 2016 | By Don Musilli | In Blog, LiteWorld Protective Enclosure
Since its entry into the market at the end of 2015, the LiteWorld Protective Enclosure has been successfully installed for over 40 customers across the U.S. The LPE was originally designed to be used over the LulzBot TAZ 5 and TAZ 6 3D printers providing 360 degrees of visibility and enough room to have two […]