Lulzbot To Release New Line Of Sidekicks 3D Printers
June 30, 2021 | By Don Musilli | In 3D Printing
Liteworld has been a reseller for Lulzbot since 2016 and has installed well over 100 printers in most of the schools in both Sarasota and Charlotte counties in Florida. The current TAZ line of printers include the Workhorse. PRO and Mini 2. There is also a 1.75mm version of the Workhorse available. Starting in July, […]Creating New and Innovative Products Using 3D Printers. A Case Study
April 24, 2021 | By Don Musilli | In Blog
In 2016, Keith Grant set up his new operations, Frontline One, in Port Charlotte, FL. His company developed and produced a line of nozzles that used high pressure water for drilling into sand and shale and for fire supression. Frontline One had develped a new method of altering the flow patterns in the new nozzles […]
So You Have An Idea For A New Product. You Have Come To The Right Place.
September 8, 2020 | By Don Musilli | In About Us
Nine years of 3D modeling and 3D Printing along with 35 plus years of creating two successful manufacturing companies makes LiteWorld LLC one of the more sought after product development and parts replacement operations in the U.S. We understand the challenges of getting a new product idea into the market and our “Failure is an […]
LiteWorld Protective Enclosure For 3D Printers Still The Biggest and Best
August 21, 2019 | By Don Musilli | In LiteWorld Protective Enclosure
When the LiteWorld Protective Enclosure was introduced in early 2017, there was no other enclosure for 3D Printers that were capable of enclosing large format FFF 3D Printers that also had active filtration systems. Today, that is still the case. The LPE is one of the more expensive enclosures on the market but it is […]LiteWorld 3D Printer Enclosure Best In The Market
November 25, 2018 | By Don Musilli | In LiteWorld Protective Enclosure
In 2016 LiteWorld LLC introduced the LiteWorld Protective Enclosure that was designed specifically for the LulzBot TAZ 5 and 6 models as well as other large bed 3D Printers. The enclosure is made from 1/4″ plexiglass with aluminum support structures and two filters on the back of the housing. One filter is a carbon media […]
3D Printing Now That 3D Hubs Is Gone – Liteworld LLC
September 22, 2018 | By Don Musilli | In About Us
For a number of years 3D HUBS had connected thousands of individuals with various types of 3D printers to offer their services to anyone who wanted to have an object or part printed but either could not afford or have access to a 3D Printer. But as of the middle of October, 3D HUBS will […]
Fusion 360 and LiteWorld 3D Printing
May 6, 2018 | By Don Musilli | In About Us
The demand for 3D printed objects, prototypes and limited production parts is growing exponentially. We have seen a large increase in the number of individuals who want to have us create models or prototypes of their ideas and concepts. This has led us to use Fusion 360 as one of our base 3D modeling software […]
The 4th Industrial Revolution – Additive Manufacturing
November 6, 2017 | By Don Musilli | In 3D Printing, Blog
There are few, if any companies around the world that are not now using or beginning to use 3D Printing or Additive Manufacturing in their operations. Certainly the medical and dental markets are moving at warp speed to adapt this technology to human health issues. The aerospace and aircraft companies along with Satellite builders are […]3D Printer Enclosure For Better Printing and Clarity
August 21, 2017 | By Don Musilli | In LiteWorld Protective Enclosure
3D Printing has moved from the quasi-experimental tinker mode to full-fledged production mode in just 6 short years. Novices and tinkerers are now using 3D printers to make virtually anything they can design. We are calling it the 4th Industrial Revolution. If you are using a 3D Printer for the first time or you have […]3D Mini Camps Most Popular For Kids
July 23, 2017 | By Don Musilli | In Blog
LiteWorld LLC and its non-profit partner, Englewood Incubation ( Innovation) Center have just completed their 3rd year of doing 3D modeling and 3D printing mini camps for youth 8 to 12 years old and our new Teen camp for 13 to 18 year olds. Over the 6 weeks in which we operate the 3D camps […]